Bushnell

laser RANGEFINDER

R-5 - 2000

6X25MM IN BLACK & OLIVE GREEN

Bushnell R5-2000 laser rangefinder is multi-coated and have Bushnell’s EXO Barrier™ coating for the highest light transmission. EXO Barrier, quite simply, is the best protective lens coating technology Bushnell has ever developed. All exterior lens surfaces have our new EXO Barrier™ coating (in addition to multi-coating). Added at the end of the coating process, EXO Barrier molecularly bonds to the lens and fills the microscopic pores in the glass. The result is an ultra-slick coating that repels water, oil, fog, dust, and debris - rain, snow, fingerprints, and dirt will not stick. EXO Barrier is built to last: the bonded coating will not fade with the passage of time or normal wear and tear.

As with multi-coated optics, special care must be taken to clean the lenses. Follow these tips for proper lens cleaning:

·       Blow away any dust or debris on the lens (or use a soft lens brush).

·       To remove dirt or fingerprints, clean with the supplied microfiber cloth rubbing in a circular motion. Using a coarse cloth or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. The included washable micro fibre cleaning cloth is ideal for routine optics cleaning. Breathe lightly on the lens to provide moisture, then gently rub the lens with the microfiber cloth.

·       For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl alcohol may be used. Always apply the fluid to the cleaning cloth – never directly on the lens.

·       The rangefinder is manufactured and tested to withstand water exposure up to IPX4 standards. It is water resistant but should not be submerged.

R5-2000 Rangefinder’s display elements:

ANGLE RANGE COMPENSATION MODES

Ø  Bow Mode

Ø  Ballistic /AB Mode

Ø  Targeting Modes

Ø  Bulls Eye (Near) Mode

Ø  Brush (Far) Mode

Ø  Battery Indicator

Ø  Active/Scan Laser Indicator

Ø  Aiming Circle / Reticle

Ø  Primary Distance (True Horizontal Distance = Bow Mode)

Ø  Distance Units (Y, M or Feet)

Ø  Elevation/Line of Sight Distance (Holdover = Rifle Mode)

Ø  Inclination Readout

Ø  Bluetooth Connectivity

Ø  Holdover Units (MOA, MIL, IN, or CM)

SELECTING DISTANCE UNITS ( Y, M, Feet)

choose distance units, hold the FIRE button down for 3 seconds while the rangefinder is powered off. Yards, Meters, and Feet will cycle while holding the button down. Release the button while the preferred unit is flashing.

MODE SELECTION USING RANGEFINDER

To change between Bullseye/Brush/Default mode, *triple press and hold to cycle between modes. Release the button while the preferred mode is flashing. *Press, Press, Press + Hold

TARGETING MODES

DEFAULT MODE (LCD Indicator – none) This setting allows most targets to range up to 2000 yards. They are used for moderately reflective targets that are typical of most distancing situations. The minimum distance in the standard model is 5 yards. To use the Automatic SCAN feature, press and hold the Fire button, then move the rangefinder from object to object while keeping the Fire button depressed. Automatic SCAN will allow the range to be continuously updated as multiple objects are targeted. Crosshair lines flash while scanning.

BULLSEYE™ (NEAR) MODE (LCD Indicator (3) This advanced mode allows easy acquisition of small targets and game without inadvertently getting distances to background targets that have stronger signal strength. When more than one object is acquired, only the distance of the closest object will be displayed. With the rangefinder in Bulls Eye mode, align the aiming circle onto the object (i.e., deer) that you want to find the distance. Next, press and hold the Fire button and move the Aiming Circle slowly over the deer. If the laser beam recognized more than one object (deer and background trees), the distance of the closer object (deer) is displayed in the LCD.

BRUSH™ (FAR) MODE (LCD Indicator (4) : This advanced mode allows objects such as brush and tree branches to be ignored so that distance only to background objects are displayed. When more than one object is acquired, only the distance of the farthest object will is displayed on the LCD. With the rangefinder in Brush mode, align the aiming circle onto the object that you want to find the distance. Next, press and hold the Fire button and move the Aiming Circle slowly over the object. If the laser beam recognized more than one object (closeup tree branch and a deer in the background), a further object (deer) would be displayed.

Select the range mode in the Bushnell Applied Ballistics App. 

ARC - ANGLE RANGE COMPENSATION MODE

Technical Specifications : 

Model:	R5-2000
Magnification x Objective Lens (mm)	6x25mm
Collection	R-SERIES
Weight	170g/ 6 oz
Battery Type	3 – Volt CR2
Retical	Vivid Display Reticle
Range Modes	Bow Mode, Rifle Mode and Regular
Range	5- 2000 Yards/ 5-1829 Meters
Reflective Range	2000Y / 1829 m
Field of View	365ft.@1000 yards/ 111.3 meters @ 1000 meters
Target Modes	Bullseye, Brush and Regular
Tree Range	1200 Y/ 1097 m
Deer Range	650 Y/ 594 m
Viewfinder Display	Meters/Yards
Protective Lens Coating	Exo Barrier
Water Resistance	IPX4 Water Resistant
Accuracy	+/- 1
ARC Modes	Bow, Rifle HD, Agle of degree,Horizontal distance
Bluetooth	Yes
Applied Ballistics	Yes
Targeting Modes	Scan
Write a review Your Name Your Review Note: HTML is not translated! Rating     Bad           Good Continue Laser Rangefinder Bushnell R5 2000 Product Code: R 5 2000 Availability: In Stock ₹41,300.00 Ex Tax: ₹35,000.00 Qty Add to Cart 0 reviews / Write a review Related Products binocular BINOCULARH2O 8x 42mm  water proof, fog proof Roof PrismPowerful bright optics in a 100% wa.. ₹14,342.90 Ex Tax: ₹12,155.00 Add to Cart